Sunday 31 July 2016

IVA Covers

Part of getting the car on the road is the dreaded IVA test (very in depth MOT for those who don't know) and part of that is making sure all the nuts and bolts are covered so they don't cause injury if you hit someone (don't worry about the wheels, hot exhaust or moving CAR as long as the nuts and bolts don't scratch you!) 

Anyway it was straight forwards a free working out how far into the wishbones the ball joints need to go. I'm working on 50mm from the centre of the ball joint to the end of the wishbone.

 This was my first attempt (on the left) but it doesn't fit very snugly so tried again using part of the tapered end of the cover. About 15mm is tapered and the rest isn't giving a total size of 50mm.



It sits nice and tight now. I put it together as above and then wound it into the wishbone using a bit of leverage when required.


And that's it. Repeat for the other side (minus the initial error) and I'll be happy in the knowledge that if I do run a child over the nuts and bolts won't graze it! 

Saturday 30 July 2016

PRESENTS!!!

Another year older (and wiser), and I was a lucky boy this year. I got:
Track rod extensions 
Track rod ends
Upper ball joints
Lower ball joints
Vented grooved front discs
Front pads
Gear stick and handbrake gaiters 
Seats
Harnesses
Adjustable seat mounts
And some vouchers which I spent on front hubs and front calipers!

Thank you to all who contributed. 

This evening I spent putting the ball joints onto the wishbones ready for fitting to the car this week. 





I also sat the harness on the seat and admired how it looked.


Can't wait to get these fitted.

Saturday 2 July 2016

Dash board

My wife bought me the dash panel as an anniversary gift which was unexpected. I spent today cutting, drilling and finally fitting it in place. 


Firstly I marked the area that needed cutting out, before covering the whole thing in masking tape to protect against any scratches.


All done.