Monday 28 March 2016

Wiring loom

First thing I did was lay it out and identity what was what. It then fitted quite obviously into the chassis so I attached the fuse box into the scuttle. From there I attached the loom along the tunnel to the rear of the car. 

I then laid them out in the engine bay going around the left hand side of the bay with everything loosely cable tied in place. Now I just need something to connect! 




Cockpit infil panels

Next job was the infil panels for the cockpit. Very straight forwards as I've fitted a few panels now.




Wednesday 23 March 2016

Started the boot infil panels

I made a good start with the boot infil panels today however can't seem to make the diff inspection panel fit. Will have to ask some questions on that.


Sunday 20 March 2016

Rear shroud taking shape

I started putting the rear shroud in place for a few reasons. Firstly I'm running out of parts and need to buy more and secondly to get it out of the way before it got damaged.

It is so far going well and will glue it in place tomorrow while I sort the boot area, infil panels and a number of other jobs. 



Scuttle in place

Due to a rapidly demonising parts box, I decided to put the scuttle in place and drill it's mounting points. 

Fairly simple as with most things so far and I can still remove it as and when required.




Saturday 5 March 2016

New home and new garage

We are now finally settled in our new home and the car is in its new garage.

Seems much smaller than the old one and my day to day car won't physically fit width wise so it's quite tight, but a very understanding wife lets me keep some parts in the house.